Krone Big Pack 1290 HDP, Original Operating Instructions, Page: 232 / 422

16 Settings
16.20 Checking/setting Variable Filling System (VFS)
232
BiG Pack 1290 HDP XC
Original Operating Instructions 150000752_01_en
INFORMATION
Just move the sensing rake (11) if the triggering sensitivity cannot be set via spring, refer to
page 231 .
BPG000-048
ü
The machine is shut down and safeguarded, refer to page 26 .
If the bale shape is still not satisfactory after the triggering sensitivity has been extended to the
maximum, install the sensing rake (11) in the next higher position.
If the overload protection still responds too frequently after the triggering sensitivity has been
reduced to the maximum, install the sensing rake (11) in the next lower position.
Moving the sensing rake
„
Loosen the hexagon head screw (17).
„
Move the sensing rake (11) into the desired position.
„ Tighten the hexagon head screw (17).
After moving the sensing rake, check or if necessary adjust the following settings:
„
Check zero position, refer to page 228 .
„ Check the triggering sensitivity and adjust it, if necessary, refer to page 231 .
„
Check the stop for the sensing rake and adjust it, if necessary, refer to page 231 .
„ Check the absorbing unit and adjust it, if necessary, refer to page 234 .