Krone Big Pack 1290 HDP, Original Operating Instructions, Page: 221 / 422

Settings 16
Setting the plunger 16.18
BiG Pack 1290 HDP XC
Original Operating Instructions 150000752_01_en 221
16.18.2 Checking/setting the cleaning rails
BP000-216
The cleaning rails (1) are positioned on the 4 rolls (3) of the plunger. They remove dirt deposits
from the running rails of the plunger.
ü
The machine is shut down and safeguarded, refer to page 26 .
„
Check dimension X.
ð If the dimension is X=1–2 mm , the setting is correct.
ð
If the dimension is not X=1–2 mm , the cleaning rails (1) must be adjusted.
Setting
„
Loosen the screws (3).
„
Adjust the cleaning rails (1) to dimension X=1–2 mm .
„ Tighten the screws (3).
„
Repeat this procedure for all cleaning rails.
16.18.3 Lateral setting of plunger
BP000-217
The plunger (1) must be centered in the bale channel (2).