Settings
16
Setting the double knotter 16.16
BiG Pack 1290 HDP XC
Original Operating Instructions 150000752_01_en
215
16.16.1
Blocking/initiating function “tying process”
I
2
1
I
II
II
2
BP000-107
In order to avoid unintentional triggering of the tying process during maintenance, adjustment
and repair work at the knotter, the lever for initiating the tying process must be locked.
ü
The machine is shut down and safeguarded,
.
Blocking function “tying process”
In order to block the function “tying process”, move the safety lever (2) from position (I) to
position (II) and set it down on the journal (1).
Initiating function “tying process”
In order to initiate the tying process, move the safety lever (2) from position (II) to position
(I).
16.16.2
Setting the billhook
BPG000-038
ü
The machine is shut down and safeguarded,
.
ü
.
The billhook tongue (1) of the knotter hook (4) is tensioned by the closer (3).
If the clamping effect on the knotter tongue (1) is excessive, the knot will be left hanging in the
knotter tongue. The twine tears off.
If there is not enough clamping effect, either no knot or a loose knot will form.
Increasing clamping effect
Tighten the nut (2) by approx. 60°.