Krone Big Pack 1290 HDP, Original Operating Instructions, Page: 220 / 422

16 Settings
16.18 Setting the plunger
220
BiG Pack 1290 HDP XC
Original Operating Instructions 150000752_01_en
BPG000-042
• The bale channel is equipped with 2 counterblades.
• The plunger (1) is equipped with 7 blades.
ü
The machine is shut down and safeguarded, refer to page 26 .
„ Release flywheel brake, refer to page 98 .
„
Turn the flywheel manually in working direction until the blades (2) are positioned above the
counterblade (3),
refer to page 117 .
„
Apply flywheel brake refer to page 98 .
„
Check the dimension X between blade (2) and counterblade (3).
Æ If the dimension is X=2-4 mm , the setting is correct.
Æ
If the dimension is not X=2-4mm , spacer washers must be added or removed.
„ Release flywheel brake, refer to page 98 .
„
Turn the flywheel manually in working direction until the blades (2) are freely accessible,
refer to page 117 .
„ Apply flywheel brake refer to page 98 .
„
Loosen the screws on the blade (2) and add or remove spacer washers (4) until the
dimension is
X=2–4 mm .
„
Tighten the screws on the blade.
„
Release flywheel brake, refer to page 98 .
„ Turn the flywheel manually in working direction until the blades (2) are positioned above the
counterblade (3),
refer to page 117 .
„
Apply flywheel brake refer to page 98 .
„ Check the dimension X between blades and counterblade.
Æ
If the dimension is X=2-4 mm , the setting is correct.
Æ If the dimension is not X=2-4mm , the procedure must be repeated.