Krone Big Pack 1290 HDP, Original Operating Instructions, Page: 230 / 422

16 Settings
16.20 Checking/setting Variable Filling System (VFS)
230
BiG Pack 1290 HDP XC
Original Operating Instructions 150000752_01_en
16.20.4 Setting the rubber pad on the zero adjuster
BP000-236
ü
The machine is shut down and safeguarded, refer to page 26 .
ü
The Variable Filling System (VFS) is in zero position, refer to page 228 .
„
Place or remove washers under the rubber buffers (16) until the dimension is X=0–2 mm .
16.20.5 Checking/setting spring at zero adjuster
BP000-237
In the factory, the spring (2) is set to dimension X=185 mm .
ü
The machine is shut down and safeguarded, refer to page 26 .
ü
The Variable Filling System (VFS) is in zero position, refer to page 228 .
„ Check dimension X.
ð
If the dimension is X=185 mm , the setting is correct.
ð
If the dimension is not X=185 mm , the spring (2) must be set.
„ Set the spring (2) to dimension X=185 mm .