KROHNE OPTIFLEX 8200 C, Handbook

Page: 9 / 220

SAFETY INSTRUCTIONS
1
9
OPTIFLEX 8200 C/F/S
www.krohne.com 06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
1.4 Electromagnetic compatibility
The device design agrees with the Electromagnetic Compatibility (EMC) Directive and the related
European Standard when installed in metallic tanks.
You can install the device on open-air tanks and tanks that are not made of metal. Refer also to
the note that follows.
This device meets the essential requirements of the related European Standard:
• Emissions: class A and class B
• Immunity: basic, industrial and controlled environments
CAUTION!
If you install a device with a rod or cable probe in a non-metallic tank or open-air pit, a strong
electromagnetic field near to the device can have an unwanted effect on the accuracy. Use a
device with a coaxial probe for this type of installation.
INFORMATION!
The device agrees with these conditions if:
•
the device has a single or double probe (rod or cable probe) and is used in a closed tank made
of metal or
• the device has a coaxial probe.