KROHNE OPTIFLEX 8200 C, Handbook

Page: 40 / 220

3
INSTALLATION
40
OPTIFLEX 8200 C/F/S
www.krohne.com 06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
3.7.5 How to install a cable probe in the tank
• Use two persons to lift the housing and the probe above the process connection.
• Hold the device 1 m / 3
½
ft above the tank.
• Unwind the probe carefully into the tank.
Figure 3-21: Wind cable probes and electrical cables carefully
1
Do not wind cable probes less than 500 mm / 20
¨
in diameter.
WARNING!
If you bend the probe too much, you will damage the device and it will not measure accurately.
Figure 3-22: Installation of devices with cable probes
1 >1 m / 3
½
ft