KROHNE OPTIFLEX 8200 C, Handbook

Page: 115 / 220

OPERATION
6
115
OPTIFLEX 8200 C/F/S
www.krohne.com 06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
6.5 Status and error messages
6.5.1 Device status (markers)
Menu item 2.2.2 Diagnostic
2.2.2 Diagnostic 2.2.2 Diagnostic
2.2.2 Diagnostic (Configuration mode / Supervisor menu) supplies more data. This
includes internal voltages, the loop current and the reset counter. You can see this data on the
device display screen and in the DTM.
Types of error message
Figure 6-12: Status markers
1
Device status (NAMUR NE 107 symbols)
2
Symbol: Failure
3
Symbol: Function check
4
Symbol: Out of specification
5 Symbol: Maintenance
6 Status marker line (marker 3 is shown)
7 When the status marker is on, a number is shown
NE 107 status Type of
error
Description
Failure Error If an error message is shown in menu item 2.10.0 History 2.10.0 History 2.10.0 History 2.10.0 History, the current output goes
to the error signal value set in menu item 2.4.2 Output Range I1 2.4.2 Output Range I1 2.4.2 Output Range I1 2.4.2 Output Range I1 (and 2.4.8 Output 2.4.8 Output 2.4.8 Output 2.4.8 Output
Range I2
Range I2 Range I2
Range I2 if the device has the optional second output) after the time set in menu
item 2.4.5 Output Error Delay
2.4.5 Output Error Delay 2.4.5 Output Error Delay
2.4.5 Output Error Delay. For more data about menu items, refer to Function
description
on page 79.
Out of specification Warning If a warning message is shown, there is no effect on the current output value.
Maintenance