KROHNE OPTIFLEX 8200 C, Handbook

Page: 164 / 220

8
TECHNICAL DATA
164
OPTIFLEX 8200 C/F/S
www.krohne.com 06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
8.6 Dimensions and weights
8.6.1 General notes
8.6.2 Primary components
INFORMATION!
All housing covers have bayonet connectors unless it is an explosion-proof (XP / Ex d-approved)
device or has the second current output / switch output (relay) option. If the device has the
second current output / switch output (relay) option or has an Ex d / XP (explosion-proof)
approval, the terminal compartment cover has a thread with a flame path.
Figure 8-11: Primary components
1 Signal converter. From left to right:
–
Vertical / Horizontal compact version (C)
–
Vertical / Horizontal compact version with sensor extension (S)
–
signal converter attached to the process connection
with a coaxial cable
–
Remote version (F)
–
signal converter attached to the probe electronics in a different housing with an RS-485 cable
2
Process connection: threaded or flange connection, including the process seal option. For more data, refer to Techni-
cal data on page 147.
3 Probe