KROHNE OPTIFLEX 8200 C, Handbook

Page: 57 / 220

ELECTRICAL CONNECTIONS
4
57
OPTIFLEX 8200 C/F/S
www.krohne.com 06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
4.4.2 How to prepare a signal cable supplied by the customer
Figure 4-13: Equipment needed to prepare the signal cable
1 Signal cable (supplied on request)
2 2 heat-shrinkable sleeves for the jacket (not supplied)
3 8 ferrules for the end of the conductors (not supplied)
4
2 Faston connectors for the shield wires
5
Shield wire insulation, 2 sleeves
6
Wire stripper (not supplied)
7
Crimping pliers (not supplied)
INFORMATION!
•
The Faston connector for the stranded drain wire must agree with DIN 46 228: E 1.5-8
•
The wire end ferrules for the twisted pair of conductors must agree with DIN 46 228: E 0.5-8