Conduct in case of hazardous malfunctions
In principle, the following applies:
1.
In the event of malfunctions that present an immediate risk for persons or property values,
immediately switch off the system.
2.
Determine cause for malfunction.
3.
Inform responsible party at the operating site about the malfunction.
4.
In the event that the troubleshooting requires work in the hazard zone, switch off the
system and secure it against a restart.
5.
Depending on the type of malfunction, eliminate the malfunction or have it eliminated by an
authorized specialist.
If the error is not included in the following tables or if it cannot be eliminated with the
measures described, contact Customer Care at Krautzberger GmbH.
9.2 Customer Care
Krautzberger GmbH
Customer service
Stockbornstr. 13
65343 Eltville am Rhein
+49 6123 - 698151
9.3 Start of operation after eliminating malfunction
After eliminating the malfunction, perform the following steps for the re-start of operations:
n
Switch on the system.
n
Ensure that no persons are present in the hazard zone.
n
Start up in accordance with the instructions and work procedures in the Chapter "Operation".
Operating instructions
T-Dok-044-GB-Rev.0
[email protected], www.krautzberger.com
GB–46
Summary of Contents for HS-25/2K
Page 56: ......
