7.4 Start operation
7.4.1 Initial start-up
1.
Switch on compressed-air supply provided by the system owner.
Fig. 4: Pull lever
2.
In order to remove dirt particles from the air ducts, operate the pull lever ( Fig. 4/1 ) of the
hand-held spray gun multiple times.
3.
End spraying process by releasing the pull lever ( Fig. 4/1).
4.
Establish the material supply for component A and component B provided by the system
owner.
5.
Point hand-held spray gun at a test surface.
6.
Begin spraying process by pulling the pull lever ( Fig. 4/1).
7.
Adjust the spray pattern (
Ä
Chapter 7.5 ‘Adjusting the spray pattern’ on page 29
).
8.
End spraying process by releasing the pull lever ( Fig. 4/1).
Hand-held spray gun HS-25/2K
ENGLISH
200-0358
GB–27
Summary of Contents for HS-25/2K
Page 56: ......
