4 Transport, delivery condition, storage, and packaging
4.1 Transport
n
The hand-held spray gun is protected by cardboard packaging.
n
The cardboard packaging can be reused for storage.
4.2 Delivery condition
Immediately upon receipt check the delivery for completeness and damage from transport.
In the event of visible exterior transport damage, proceed as follows:
n
Do not accept delivery or only do so with reservations.
n
Record scope of damage on the transport documents or on the bill of delivery of the shipping
company.
n
Initiate complaint.
4.3 Storage
Store the device/machine under the following conditions:
n
If possible, store the device/machine in the original packaging.
n
Do not store outside.
n
Store in a dry and dust-free environment.
n
Keep away from any aggressive media.
n
Protect from UV radiation.
n
Avoid mechanical shocks.
n
Storage temperature: 15 to 40 °C.
n
Relative atmospheric humidity: max. 60%.
n
For storage for longer than 3 months, check the general condition of all parts and the pack-
aging on a regular basis.
It is possible that there are notes on the packaged units concerning the storage that extend
beyond the requirements listed here. Follow those accordingly.
4.4 Packaging
The device is packaged in accordance with the anticipated transport conditions and the packaging
needs to protect the device against transport damage, corrosion, and other damage.
n
Remove packaging material.
n
Remove potentially present transport safety restraints.
Disposal of packaging
Dispose of the packaging material in accordance with the respectively applicable legal regulations
and ordinances.
Operating instructions
T-Dok-044-GB-Rev.0
[email protected], www.krautzberger.com
GB–16
Summary of Contents for HS-25/2K
Page 56: ......
