Krautzberger HS-25/2K, Operating Instructions Manual

Page: 47 / 57

9.4 Troubleshooting table
Troubleshooting table
Spray pattern Error Cause Remedy
Normal flat jet spray pattern
Spray pattern too
heavy towards the top
and towards the
bottom n Dirty air nozzle
n Dirty fluid nozzle
Clean nozzles
Spray pattern concen-
trated on the left or
right side n Dirty air nozzle
n Dirty fluid nozzle
Clean nozzles
Heavy application in
the centre of the spray
pattern n Too much material n Reduce material supply
n Material too thick n Thin material
Split spray pattern n Insufficient mate-
rial n Increase material
supply
n Flat jet air pres-
sure too high n Reduce flat jet air pres-
sure
Fluid jet comes out in
spurts or rapid bursts n Insufficient mate-
rial supply n Increase material
supply
n Blocked fluid path n Clean
n
Loose or dam-
aged fluid nozzle
n
Tighten or replace
n Worn needle seal n Replace needle seal
Fluid leak at the
sealing nut n Needle seal
defective n Replace needle seal
Fluid nozzle drips n Worn or damaged
fluid needle n Replace fluid needle
n Dirty or damaged
fluid nozzle n Clean or replace fluid
nozzle
Hand-held spray gun HS-25/2K
ENGLISH
200-0358 GB–47