Kramer Electronics Ltd.
VP-554X
– Using Embedded Web pages
46
3. Perform any of the following actions:
▪
Adjust the EQUALIZER settings via the sliders.
▪
Set the Mixer (Output 1 + Mic) level.
▪
Set the HDMI (embedded audio) volume and hard-stop levels.
▪
Click
under HDMI Vol to mute the HDMI audio signal.
▪
Set the LINE (analog audio output) volume and hard-stop levels.
▪
Click
under LINE Vol to mute the analog audio signal.
▪
Next to Set Delay, open the drop-down box to set the audio delay time.
▪
Next to Audio Bypass, select ON to enable Audio Bypass mode (see
).
▪
Next to HDMI Audio Selection, select the audio input type to be switched to the
output (Automatic, Embedded or Analog), see
▪
Prepare audio Mapping for each audio input to be switched (see
).
Audio Out parameters are defined.