Kramer Electronics Ltd.
VP-554X
– Using Embedded Web pages
54
3. Configure the commands as follows:
▪
Enter a device command (for example, turn projector off).
▪
Enter the command description.
▪
Select the output to which the command is to be sent (
Output1
to
Output4
).
▪
Select a trigger from the drop-down box to carry out the command (
5V On
,
5V Off
,
Sync/Clock
or
No Sync/No Clock
).
▪
Enter a delay time, if required.
▪
Check
Hex
to view the Hex format, if required.
▪
Check
Enable
to enable the command.
Figure 37: RS-232
– Creating a Command
4. Click
Add
.
Figure 38: RS-232 Page
– Command Added
5. Optionally, perform the following for the command:
▪
Click
Delete
to delete the command.
▪
Click
Test
to test the command.
▪
Change any of the command configurations.
▪
Enable or disable the command.
6. Add as many commands as needed.
RS-232 commands are configured and can be sent to an external device that is connected
to the selected output.
