Kramer Electronics Ltd.
VP-554X
– Using Embedded Web pages
52
3. Check:
▪
An HDBT/HDMI input under Step-In Device, to pass data from a controller that is
connected via the connected Step-in device to the HDBT/HDMI input to which it is
connected.
▪
An HDBT port under General, to pass data from a controller that is connected via the
Ethernet port to one of the HDBT inputs or outputs.
Data can be transferred depending on your selection.
Setting the HDBT Port Data Routing Parameters
To set the HDBT port parameters:
1. In the Navigation pane, click
Data Routing
. The Data Routing page appears.
2. Select the Setting tab. The Setting tab appears.
Figure 35: Data Routing Page
3. For each HDBT port, set the:
▪
Baud Rate
: 4800, 9600, 19200, 38400, 57600 or 115200.
▪
Data Bits
: 5, 6, 7 or 8.
▪
Parity
: NONE, ODD or EVEN.
▪
Stop Bits
: 1 or 2.
▪
Flow Control
: OFF or ON.
▪
Protocol
: TCP or UDP.
