Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
24
Setting Switching Mode
VP-554X
enables configuring for automatic switching of the input source upon signal loss or
when a source is plugged in:
•
Off
– Set to manual switching.
•
Auto Scan
– Set to auto-scan the inputs when no input source is detected.
•
Last connected
– When detecting that a source is connected to an input (which
previously had no signal), automatically switch to that input.
To set the switching mode:
1. On the front panel press
MENU
. The menu appears.
2. Click
ADVANCED
and select
AUTO SWITCH
.
3. Click
ENTER
and select
AUTO SCAN
,
LAST CONNECTED
or
OFF
.
4. Press
ENTER
.
Switching mode is defined.
Accessing the Video Wall mode
VP-554X
can be configured as a 2x2 video wall.
To access the video wall mode:
1. On the front panel press
MENU
. The menu appears.
2. Click
ADVANCED
and select
VIDEO WALL
.
3. Click
ENTER
and select
ON
or
OFF
.
4. Press
ENTER
.
VP-554X
is set to video wall mode.
Managing EDID via OSD
VP-554X
enables managing the EDID via the OSD menu buttons.
The EDID menu appears in the OSD output 1 menu only.
