Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
26
6. Define the power up setup: DISABLE, RESTART or RESUME.
7. Press
ENTER
.
Daily reset time is defined.
Setting the HDBT Input Range
You can set each of the HDBT inputs to long-reach mode.
The HDBT LONG REACH menu appears in the OSD output 1 menu only.
To set an input to the long reach mode:
1. On the front panel press
MENU
. The menu appears.
2. Click
ADVANCED
and select
HDBT LONG REACH
.
3. Click
ENTER
and select
ON
/
OFF
for the desired input.
4. Press
ENTER
.
HDBT input range is defined.
Viewing Device Information
Device information includes the selected source, the input and output resolutions, the HDCP
status and the software version.
To view the information:
1. On the front panel press
MENU
. The menu appears.
2. Click
INFORMATION
.
3. View the information.
Information appears and is viewed.
Performing a Reset
VP-554X
enables performing a soft reset and a full factory reset via the front panel MENU
buttons.
To reset the device:
1. On the front panel press
MENU
. The menu appears.
2. Click
RESET
and select
RESET
(to reset all the parameters excluding Network
parameters) or
RESET ALL
.
Wait for completion of factory reset (resolution is set to Native).
Device is reset.
Defining Network Parameters
Define the Network parameters via the OSD menu.
The ETHERNET menu appears in OSD output 1 menu only.
