Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
18
3. Click a menu item as described in the following table:
Menu Item
Function
COLOR GAIN for R, G and B
Set the Red, Green and Blue shades.
COLOR OFFSET for R, G and B
Set the color offset level for red, green and blue.
Brightness
Set the brightness.
Contrast
Set the contrast.
HUE
Set the color hue.
SATURATION
Set the color saturation.
SHARPNESS
Set the sharpness of the picture.
NR (Noise Reduction)
Select the noise reduction filter: Off (default), Low, Middle or
High.
RESET PICTURE
Reset image parameters to their default value.
Image parameters are adjusted.
Setting Audio Parameters
VP-554X
enables defining the audio parameters for the selected OSD output.
To set the audio parameters:
1. On the front panel press
MENU
. The menu appears.
2. Select
AUDIO
.
3. Select an audio parameter from the list below and adjust as needed.
4. For each adjusted parameter, press
ENTER
.
Menu Item
Function
SOURCE
Select any of the following audio sources: HDMI (1 to 6), HDBT (1to 4),
ANALOG (1 to 8), MIC1, MIC2, MIC 1+2, FOLLOW VIDEO (default).
EMBEDDED HDMI (1 to 6)
Select EMBEDDED, ANALOG, or AUTOMATIC (default).
EMBEDDED selects the embedded HDMI audio source; ANALOG
selects the analog audio corresponding to the input; and AUTOMATIC
(default) selects the embedded audio when an HDMI source is detected,
or the analog audio when a DVI input is detected.
HDBT (1 to 4)
AUDIO
MAPPING
HDMI (1 to 6)
When the EMBEDDED menu is assigned to ANALOG (or AUTOMATIC,
if a DVI source is connected).
Select NONE (default) for no analog signal to be assigned to the
selected source, or select an analog source (ANALOG 1 to ANALOG 8)
to assign to a video source:
After selecting an analog source, that specific source is unavailable for a
different source.
For example, if HDMI 1 Mapping is ANALOG 7, ANALOG 7 will not be
available for the other inputs for mapping.
HDBT (1 to 4)
PC
AUDIO BYPASS
Select ON to “bypass” an embedded audio input to the output (for
example, to support multi-channel, compressed audio formats, Dolby,
DTS, etc.). (Default, OFF)
HDMI VOLUME
Set the HDMI output volume.
0 to 100 (Default: 80).
LINE VOLUME
Set the analog audio volume.
0 to 100 (Default: 80).
HDMI HARDSTOP
Set HDMI volume hard stop.
0~100 (Default: 80). (Use this feature to limit the maximum HDMI output
volume level).
LINE HARDSTOP
Set the analog audio hard stop.
