Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
17
Setting Screen Blank State
Select the
VP-554X
screen freeze state.
To set the blank screen state:
1. On the front panel press
MENU
. The menu appears.
2. Select
VIDEO
, then select
BLANK
.
3. Press
ENTER
and select
blank (5v low)
,
blank
or
OFF
.
4. Press
ENTER
.
The screen freeze state is set.
Adjusting PC Image Parameters
VP-554X
enables adjusting the VGA position and synchronization parameters.
To adjust the PC parameters:
1. On the front panel press
MENU
. The menu appears.
2. Click
VIDEO
then select
PC SETUP
.
Menu Item
Function
AUTO SETUP
auto adjusts the image (centers it correctly on the screen) every
time the input is switched to VGA or when the input resolution
changes.
PC setup messages appear as follows:
INCOMPLETE
,
COMPLETE
or
EXECUTING
.
PC H-POSITION
Set the horizontal position of the picture.
PC V-POSITION
Set the vertical position of the picture.
PC PHASE
Set the clock phase.
PC CLOCK
Set the clock frequency.
RESET
Reset settings to their default values.
PC MODE
Select PC resolution mode.
PC parameters are adjusted.
Adjusting the Image
VP-554X
enables adjusting the selected OSD output image parameters such as contrast,
brightness and so on.
To adjust the image parameters:
1. On the front panel press
MENU
. The menu appears.
2. Click
PICTURE
.
