Kowa K9L48B, Service Manual, Page: 48 / 60

GG-09001 Edition 1.3
-
４８
-
Dipswitches on the side of the power supply unit
No Detail OFF ON
1
Intensity of the flashlight increases by one step when using the
camera on the upper mount.
※1
Refer to following Light intensity
control list.
2
Intensity of the flashlight decreases by one step when using the
camera on the upper mount.
※1
3
Intensity of the flashlight increases by one step during FA
imaging.
Refer to following Light intensity
control list.
4
Intensity of the flashlight decreases by one step during FA
imaging.
5
Blue/Brown Switch Mode
※2
（
Intensity of the flashlight is adjusted for Blue/Brown Mode.
）
Disabled Enabled
☆
6 Mydriatic fluorescein angiography select switch can operate
Exciter filter
insertion
☆
Barrier filter
insertion
7
Jig Mode:Forced shutter
（
This allows you to release the shutter whether a camera is
attached or not.
）
Disabled
☆
Enabled
8
Jig Mode: Forced flashing
（
This allows you to use the flashlight whether a camera is
attached or not.
）
Disabled
☆
Enabled
9
K9L-RL48 Mode Disabled Enabled
10
Don't use Don't use
☆
Don't use
・
Mark of
☆
stands for standard factory setting.
・
No. 1-4, 9 are different by system constitution.
※
1 This function is not available when using FA Mode.
※
2 It is required to change the setting of dipswitches on the rearof the right switch panel
concomitantly.
・
"No1 and No2", "No3 and No4" become the pair.
Light intensity control list
Light
intensity
Normal +1 -1
No.1(3) OFF ON OFF
No.2(4) OFF OFF ON