
GG-09001 Edition 1.3
- 13 -
5-2 Removing optical head unit outer cover
①
All outer covers of the optical head unit are removable with the optical head unit kept installed
on the tilt arm. Before proceeding to any further procedure, rotate the tilting handle to tilt the
optical head unit to the top position.
②
Remove the cap located on the cover top, undo the screw and pull out the picture angle knob.
③
Undo 4 screws from the positions shown below and remove the cover.
④
Undo 3 screws and remove the cover from the other side as shown below.
⑤
Remove the cap for electric flash compartment.
⑥
Undo 2 screws and slide out the inner cover from the tilting section as shown below.
⑦
To remove the focusing knob, you need to remove a cap placed over the knob retaining screw
using a flat-head screwdriver. Then, l
oosen the
screw and remove the knob.
①
②
②
③
③
③
④
④
④
⑤
⑥
⑥
⑦
⑦
⑦
Summary of Contents for K9L48B
