Kowa K9L48B, Service Manual, Page: 47 / 60

GG-09001 Edition 1.3
-
４７
-
10. Dipswitches
10-1 Lists of dipswitches
Dipswitches that allow you to select detailed settings are provided on the PCB within the optical
head unit, the switch panels, and the power supply unit. Although these dipswitches are
already set to the optimum settings for each system configuration at the factory, you may
change these settings using the lists of dipswitches below when you changes the system
configuration or you want to change the settings to suit your preferences.
－ － － －
Lists of Dipswitches
－ － － －
Dipswitches on the optical head unit main PCB
No Detail OFF ON
1
Intensity of the luminous focus lines in Non-mydriatic Mode is
increased from the baseline intensity obtained at OFF position.
Refer to following Light
intensity control list.
2
Intensity of the focus line in Non-mydriatic Mode is decreased
from the baseline intensity obtained at OFF position.
3
Intensity of the working area indicating luminous dots in
Non-mydriatic Mode is increased from the baseline intensity
obtained at OFF position.
Refer to following Light
intensity control list.
4
Intensity of the working area indicating luminous dots in
Non-mydriatic Mode is decreased from the baseline intensity
obtained at OFF position.
5 Don't use Don't use
☆
Don't use
6 Don't use Don't use
☆
Don't use
7
The area where the built-in CCD uses for verification of
parameters including AGC is changed to the center area.
Not Change
☆
Change
8 Don't use Don't use
☆
Don't use
・
Mark of
☆
stands for standard factory setting.
・
"No1 and No2", "No3 and No4" become the pair.
・
No1 - 4 are in OFF position as standard factory settings.
Dipswitches on the rear of right switch panel
No Detail
OFF ON
1
Start-up mode when power is turned ON Non-mydriatic
☆
Mydriatic
2
External video input Auto Manual
☆
3
Counting sound when the timer operates Sounding
☆
No sounding
4
Monitor select switch Enabled
☆
Disabled
5
Don't use Don't use
☆
Don't use
6
Don't use Don't use
☆
Don't use
7
Blue/Brown Switching Mode
※1
（
This dipswitch makes the clinical
recording photography switch to work in
Blue/Brown Switching Mode
）
Disabled
Enabled
☆
8
Don't use Don't use
☆
Don't use
9
Don't use Don't use
☆
Don't use
10
Don't use Don't use
☆
Don't use
・
Mark of
☆
stands for standard factory setting.
※
1 It is required to change the dipswitch setting of the power supply unit concomitantly.
Light intensity control list
Light
intensity
X2 X1 X1/2 X1/4
No.1(3) ON OFF OFF ON
No.2(4)
OFF OFF ON ON