Kowa K9L48B, Service Manual, Page: 15 / 60

GG-09001 Edition 1.3
- １５ -
⑥
Loosen 2 screws holding the dipswitch on the rear of the right switch panel (when viewed from
the controllers side) and remove the screws and the cover together.
⑥ ⑥
⑦
Slowly lift up the panel.
※
Do not
apply excess force since cables are still connected.
⑧
Undo the screw and disconnect the earth line.
⑨
Pull out 2 cables from the PCB on the right side of the panel.
⑩
Remove the cable cramp and slowly remove the panel.
※
Make sure that the dipswitch is not caught when removing the panel.
⑦ ⑧ ⑨
⑩ ⑩