Kowa K9L48B, Service Manual, Page: 27 / 60

GG-09001 Edition 1.3
-
２７
-
6-10 Replacing LCD monitor
①
Cut off the tying band to remove the ferrite core and disconnect the cable from the
optical head
unit main PCB (
JM23 LCD
).
②
Undo the screws and remove the LCD monitor.
③
Undo 4 screws from behind the LCD monitor and remove the rear cover.
④
Disconnect all cables shown below.
(To disconnect the flat cable, pull the brown attachment of the connector to the direction of the arrow.)
⑤
Undo the screws from the PCB and remove the LCD PCB (one of the screws has already
been removed when removing the connector above).
⑥
Undo the screws from the inverter PCB and remove the PCB.