Kowa K9L48B, Service Manual, Page: 12 / 60

GG-09001 Edition 1.3
- １２ -
5. Preparing for Part Replacement
5-1 Removing optical head unit
①
Using the
Allen wrench supplied with
VX-10
α
, loosen the bolts and remove the cable installation
plate.
②
Remove the two connectors that connect to the power supply.
※
When it is difficult to unplug the larger connector, insert the connector puller (a common
tool for VX-10 and VX-10i) supplied with VX-10
α
into appropriate space around the
connector and carefully pry out the connector.
③
Rotate the tilting handle to tilt the optical head unit to the top position.
④
Using the Allen wrench supplied with VX-10
α
, loosen the bolts holding the optical head unit and
remove the unit.
※
When loosening the bolts, hold the optical head unit securely.
① ① ②
③ ④ ④
Turn the power switch off and unplug the power supply cable before proceeding the following procedure.
Caution Caution Caution Caution