Kowa K9L48B, Service Manual, Page: 39 / 60

GG-09001 Edition 1.3
-
３９
-
8-6 Replacing Fuse holder
①
Bend the circle part of the new fuse holder to the direction of the arrow in figure.1.
【
Attention: Hold the both end of the new fuse holder, when bending.
】
②
Remove the fuse holder, which is connected with brown cables, by loosening the circle part in
figure.2.
1 2
③
Disconnect the brown cable, which is circled in figure.3, from fuse holder, and connect the
cable with new fuse holder at the same position.
④
Disconnect another brown cable, which is circled in figure.4, from fuse holder, and connect
the cable with new fuse holder at the same position.
⑤
Remove the fuse holder, which is connected with sky blue cables, by loosening the circle part
in figure.5.
3 4 5
⑥
Disconnect the sky blue cable, which is circled in figure.6, from fuse holder, and connect the
cable with new fuse holder at the same position.
⑦
Disconnect another brown cable, which is circled in figure.7, from fuse holder, and connect
the cable with new fuse holder at the same position.
⑧
Check the cables are connected correctly, after fixing the new fuse holders, which were
connected by
③
-
⑦
, on power supply unit.
6 7 8