Kowa K9L48B, Service Manual, Page: 28 / 60

GG-09001 Edition 1.3
-
２８
-
⑦
Remove the flat cable through the ferrite core and disconnect the cable from the PCB.
⑧
Undo the screws from the sheet metal and remove the front cover.
⑨
Peel off the ferrite core, remove the screws from the sheet metal, and separate the LCD from
the sheet metal.
⑩
Follow the steps from
①
to
⑨
to remove the target component. Follow the steps in the
reverse order to reassemble it.
⑪
If the cables can not be routed properly when installing the LCD monitor,
temporarily
remove
the fan unit from the optical head unit using the steps from
①
to
③
in “6-5 Replacing optical
head unit fan”.
※ ※ ※ ※
Make sure that all cables are securely connected and no cable is left unconnected
when reassembling. Also, connect the ferrite core securely.