Kowa K9L48B, Service Manual, Page: 14 / 60

GG-09001 Edition 1.3
- １４ -
5-3 Removing switch panel section
※
Remove
the tilt arm and the optical head unit before
proceeding to the steps below.
①
Undo 4 screws from the power supply unit and remove the power supply unit cover.
②
Undo 2 screws from the power supply unit and remove the panel cable installation plate.
③
Remove the connecter and the earth line exposed after removing the power supply unit cover
in the step
②
above.
① ① ①
② ③
④
Undo 4 screws from the panel cover.
※
Besides the two screw shown in the picture below,
there are two other screws in the same position on the opposite side.
⑤
Undo all screws and remove the upper and lower rings and the lock lever.
④ ④ ⑤
⑤ ⑤ ⑤