Korg microARRANGER, Owner'S Manual

Page: 196 / 244

194 Effects
Pitch/Phase Mod.
031: Scratch
This effect is applied by recording the input signal and
moving the modulation source. It simulates the sound
of scratches you can make using a turntable.
a: Scratch Source, b: Response
The Scratch Source parameter enables you to select the
modulation source that controls simulation. The value of the
modulation source corresponds to the playback position. The
Response parameter enables you to set the speed of the
response to the modulation source.
c: Envelope Select, c: Src, d: Threshold
When “Envelope Select” is set to D-mod , the input signal will
be recorded only when the modulation source value is 64 or
higher.
When “Envelope Select” is set to
Input , the input signal will
be recorded only when its level is over the Threshold value.
The maximum recording time is 1365msec. If this is
exceeded, the recorded data will start being erased from the
top.
e: Response
This parameter enables you to set the speed of the response
to the end of recording. Set a smaller value when you are
recording a phrase or rhythm pattern, and set a higher value if
you are recording only one note.
f: Direct Mix
With Always On , a dry sound is usually output. With Always
Off , dry sounds are not output. With Cross Fade , a dry sound
is usually output, and it is muted only when scratching.
Set Wet/Dry to
Wet to use this parameter effectively.
a
Scratch Source Off...Tempo
Selects the modulation source for simulation control

,
b
Response 0...100
Sets the speed of the response to the Scratch Source

c
Envelope Select D-mod, Input
Selects whether the start and end of recording is controlled via the modula-
tion source or the input signal level

,
Src Off...Tempo
Selects the modulation source that controls recording when Envelope Select
is set to D-mod

d
Threshold 0...100
Sets the recording start level when Envelope Select is set to Input 

e
Response 0...100
Sets the speed of the response to the end of recording

f
Direct Mix Always On, Always Off, Cross Fade
Selects how a dry sound is mixed

g
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175 –100...+100
Input
D-mod
Envelope Select
D
-mod
Envelope Control
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Scratch
Direct
Mix
D
-mod
Rec Control Scratch
+ Max
Zero
Scratch!
D
-mod
– Max
JS X
Ribbon
JS+Y
JS–Y
etc…
Zero + Max
Scratch Source
Recorded Sound
Scratch Source
Start Playback Position End