Korg microARRANGER, Owner'S Manual

Page: 188 / 244

186 Effects
Pitch/Phase Mod.
017: Harm.Chorus

(Stereo Harmonic Chorus)
This effect applies chorus only to higher frequencies.
This can be used to apply a chorus effect to a bass
sound without making the sound thinner. You can also
use this chorus block with feedback as a flanger.
g: High/Low Split Point
This parameter sets the frequency that splits the high and low
range. Only the high range will be sent to the chorus block.
h: Feedback
Sets the feedback amount of the chorus block. Increasing the
feedback will allow you to use the effect as a flanger.
018: MTap Ch/Dly

(Multitap Chorus/Delay)
This effect has four chorus blocks with a different LFO
phase. You can create a complex stereo image by set ‐
ting each block’s delay time, depth, output level, and
pan individually. You can also fix some of the chorus
blocks to combine the chorus and delay effects.
a
LFO Waveform
Selects LFO Waveform Triangle, Sine
b
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right

Fx:010
c
LFO Frequency [Hz] 0.02...20.00Hz
Sets the LFO speed

Fx:009,
Src
Selects the modulation source of LFO speed Off...Tempo
Amt –20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
BPM/MIDI Sync Off, On
Switches between using the frequency of the LFO speed and using the
tempo and notes

Fx:009,
BPM
Selects MIDI Clock and assigns tempo MIDI, 40...240

Fx:009
Base Note
Selects the type of notes that specify the LFO speed

Fx:009
Times x1...x16
Sets the number of notes that specify the LFO speed

Fx:009
e
Pre Delay [msec]
Sets the delay time from the original sound 0.0...50.0msec
f
Depth
Sets the depth of LFO modulation 0...100
Src Off...Tempo
Selects the modulation source of the LFO modulation depth
Amt –100...+100
Sets the modulation amount of the LFO modulation depth
g
High/Low Split Point 1...100
Sets the frequency split point between the low and high range

h
Feedback
Sets the feed back amount of the chorus block –100...+100

High Damp [%] 0...100%
Sets the high range damping amount of the chorus block
i
Low Level
Sets the low range output level 0...100
High Level
Sets the high range (chorus) output level 0...100
j
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175 –100...+100
Left
Right
Feedback
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
Low Level
Low Level
High Level
High Level
High/Low Split Point
High Damp
Chorus/Flanger
Chorus/Flanger
a
LFO Frequency [Hz]
Sets the LFO speed 0.02...13.00Hz
b
Tap1(000) [msec]
Sets the Tap1 (LFO phase=0 degrees) delay time 0...570msec
Depth
Sets the Tap1 chorus depth 0...30
Level
Sets the Tap1 output level 0...30
Pan L6...L1, C, R1...R6
Sets the Tap1 stereo image
c
Tap2(180) [msec] 0...570msec
Sets the Tap2 (LFO phase=180 degrees) delay time
Depth
Sets the Tap2 chorus depth 0...30
Level
Sets the Tap2 output level 0...30
Pan L6...L1, C, R1...R6
Sets the Tap2 stereo image
d
Tap3(090) [msec] 0...570msec
Sets the Tap3 (LFO phase=90 degrees) delay time
Depth
Sets the Tap3 chorus depth 0...30
Level
Sets the Tap3 output level 0...30
Pan L6...L1, C, R1...R6
Sets the Tap3 stereo image
e
Tap4(270) [msec] 0...570msec
Sets the Tap4 (LFO phase=270 degrees) delay time
Depth
Sets the Tap4 chorus depth 0...30
Level
Sets the Tap4 output level 0...30
Pan L6...L1, C, R1...R6
Sets the Tap4 stereo image
f
Tap1 Feedback
Sets the Tap1 feedback amount –100...+100
Src Off...Tempo
Selects the modulation source of Tap1 feedback amount and effect balance
Amt –100...+100
Sets the Tap1 feedback amount and modulation amount
g
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175 –100...+100
Left
Right
Feedback
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
+
Level
Level
Level
Level
Pan
Pan
Pan
Pan
LFO: Triangle
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap4 Delay
0 [degree]
180 [degree]
90 [degree]
270 [degree]