manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 186

Sequencer mode

178

SEQ P8–2: IFX Route 2

8–2–1: Routing2 T01–08, 
8–2–2: Routing2 T09–16

Here, you can specify the buses, and effect control bus, for 
the outputs of tracks 1–8 and 9–16.

8–2–1(2)a: Routing Map
8–2–1(2)b: Track Select, Tempo, RPPR
8–2–1(2)c: Track Info

For more information, please see “8–1–1(2)a: Routing Map” 
on page 175 and “2–1: Trim T01–08, 2–2: Trim T09–16” on 
page 149.

8–2–1(2)d: Routing2

Bus (IFX/Output) Select

[L/R, IFX1...5, Off]

This specifies the output bus for the 
oscillator(s). This is the same parameter as in the 8–1: IFX–
Routing 1 T01–08 and T09–16 pages.

For more information, please see “Bus (IFX/Output) Select” 
on page 113.

FX Control Bus

[Off, 1, 2]

Sends the output of the track to an FX Control bus (two-
channel mono FX Ctrl 1 or 2).

Use the FX Control buses when you want a separate sound 
to control the audio input of an effect. You can use two FX 
Control buses (each is a two-channel mono bus) to control 
effects in various ways.

For more information, please see “FX Control Buses” on 
page 274.

▼

8–2–1(2)

: 

Menu Command

• 0: 

Memory Status

☞

p.191

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Copy Insert Effect

☞

p.76

• 3: 

Swap Insert Effect

☞

p.76

• 4: 

DrumKit IFX Patch

☞

p.123

• 5: 

FF/REW Speed

☞

p.192

• 6: 

Set Location (Set Location for Locate Key)

☞

p.192

• 7: 

Put Effect Setting to Track

☞

p.204

For more information, please see “Sequencer: Menu 
Command” on page 191.

8–2–8: Common FX LFO

The two Common FX LFO 1, 2 allow you to synchronize 
LFO-based modulation for multiple effects, such as phasers, 
flangers, filters, and so on.

The Common LFOs control only the frequency, MIDI 
synchronization, and reset options; each individual effect 
still has its own settings for the LFO waveform and phase.

Within the individual effects, you can choose whether to use 
one of the Common LFOs, or to use the individual effect’s 
frequency, sync, and/or reset settings instead. This is done 
via the effect’s 

LFO Type

 parameter; select 

Individual

 to use 

the effect’s settings, or 

Common 1

 or 

2

 to use the Common 

LFOs.

8–2–8a: Common FX LFO1

Ctrl Ch (Control Channel)

[Ch01...Ch16, Gch]

Specifies the MIDI channel that will control dynamic 
modulation (Dmod) for Common LFO 1 and 2.

Gch:

 The global 

MIDI channel

 (Global 1–1a) will be used 

for control. This is the default setting.

Sync (Reset)

[Off, On]

Source (Dmod Source)

[List of Dmod Sources]

Frequency

[0.02...20.00 (Hz)]

MIDI/Tempo Sync

[Off, On]

BPM

[MIDI, 40.00...300.00]

Base Note

[

 

, 

 3 

, 

 , 

 3 

, 

 , 

 3 

, 

 

, 

 3 

, 

 

, 

]

Times

[01...32]

These parameters are the same as in Program mode. For 
more information, please see “8–8a: Common FX LFO1” on 
page 68.

8–2–8b: Common FX LFO2

These parameters are the same as for Common FX LFO1. For 
more information, please see “8–2–8a: Common FX LFO1,” 
above.

8–2

–1a

8–2

–1b

8–2

–1c

8–2

–1d

8–2

–1

Menu

8–2
–8a

8–2
–8b

8–2

–8

Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands