manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 96

Combination mode

88

Realtime Control

Realtime Control lets you use the four knobs to edit the 
parameters of a combination or effect.

There are two modes of realtime control: A and B. These two 
modes will alternate each time you press the REALTIME 
CONTROL switch. In each mode, you can use knobs 1–4 to 
control parameters. Your selection of mode is remembered 
independently for each combination. If you switch to a 
different control surface function, and then press the 
REALTIME CONTROL switch to return to realtime control, 
the mode you had selected will still be active.

In A mode, the functions assigned to knobs 1–4 are fixed. In 
B mode, you can assign a variety of modulation functions to 
knobs 1–4. To assign functions, use the P1: Controllers Setup 
page (page 91).

0–8b: Control Assign, RTC Knob Mode, 

Selected Parameter Information

Control Assign [Realtime Control, External, ARP]

This selects the items that will be controlled by the control 
surface.

RTC Knob Mode

[A, B]

Selects either A or B as the realtime control mode for the 
knobs. You can also use the front panel REALTIME 
CONTROL switch to make this selection.

Selected Parameter information

When you select a knob, this area shows detailed 
information about its parameter assignments.

0–8c: Realtime Control 

The Realtime Control A mode knob functions (CUTOFF – 
EG RELEASE) are fixed. You can assign a variety of 
functions to Realtime Control B mode knobs 1–4 (Knob1B – 
Knob4B). MIDI control changes are assigned for each 
function.

When you move a knob, it sends out the corresponding 
MIDI CC.

This will control timbres on the global MIDI channel.

Most of these functions adjust (scale) the parameter settings 
of the timbre programs. Unless otherwise noted, “scaling” 
means that the parameters are at their programmed values 
when the controller is at 64, at their minimum when the 
controller is at 0, and at their maximum when the controller 
is at 127. For another look at this, please see the diagram 
below.

CC parameter scaling

Knob 1–A: Flt Fc (Cut Off)

[000...127]

This knob scales the cutoff frequencies of Filters A and B, 
and transmits and receives MIDI CC #74. 

Knob 2–A: Flt Reso (Resonance)

[000...127]

This knob scales the resonance of Filters A and B, and 
transmits and receives MIDI CC #71. 

Knob 3–A: Flt EG (Filter EG Intensity)

[000...127]

This knob scales the effect of the Filter EG on the cutoff 
frequencies of Filters A and B. It also transmits and receives 
MIDI CC#79.

Knob 4–A: EG Rel (EG Release)

[000...127]

This knob scales the release time of the Filter and Amp EGs, 
and transmits and receives MIDI CC#72.

Knob 1…4–B

[000...127]

These are the current values and assigned functions (MIDI 
CC) for the Realtime Control B mode knobs.

In the P1: Controllers– Controllers Setup page you can 
assign a variety of modulation functions to Realtime Control 
B mode knobs 1–4.

Many of the functions scale a particular set of Program 
parameters. All of the settings also correspond to MIDI 
messages–usually CCs.

0–8c

0–8b

0–8a

0–8
Menu

99

00

64

0

127

CC Value

Parameter

Value

As Programmed

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands