manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 227

Global P0: Basic Setup 0–2: System Preference

219

0–2b: Memory Protect

Program

[Off, On]

This setting protects the internal program memory.

On (checked):

 Internal program memory will be protected, 

and the following write operations cannot be performed.

• Writing a program

• Loading preloaded program data

• Loading program data from media

• Receiving program data via MIDI data dump

Off (unchecked):

 Data can be written to internal program 

memory.

Combination

[Off, On]

This setting protects the internal combination memory.

On (checked):

 Internal combination memory will be 

protected, and the following write operations cannot be 
performed.

• Writing a combination

• Loading preloaded combination data

• Loading combination data from media

• Receiving combination data via MIDI data dump

Off (unchecked):

 Data can be written to internal 

combination memory.

Song

[Off, On]

This setting protects the internal song memory.

However, when the power is turned off, the song data in 
song memory will be lost regardless of this setting.

On (checked):

 Internal song memory will be protected, and 

the following write operations cannot be performed.

• Recording to the sequencer

• Loading preloaded song data

• Loading song data from media

• Receiving song data via MIDI data dump

Off (unchecked):

 Data can be written to internal song 

memory.

Drum Kit

[Off, On]

This setting protects the internal drum kit memory.

On (checked):

 Internal drum kit memory will be protected, 

and the following write operations cannot be performed.

• Writing a drum kit

• Loading preloaded drum kit data

• Loading drum kit data from media

• Receiving drum kit data via MIDI data dump

Off (unchecked):

 Data can be written to internal drum kit 

memory.

Arpeggio User Pattern

[Off, On]

This setting protects the internal user arpeggio pattern 
memory.

On (checked):

 Internal user arpeggio pattern memory will 

be protected, and the following write operations cannot be 
performed.

• Writing a user arpeggio pattern

• Loading preload arpeggio pattern data

• Loading user arpeggio pattern data from media

• Receiving user arpeggio pattern data via MIDI data 

dump

Off (unchecked):

 Data can be written to internal user 

arpeggio pattern memory.

▼

0–2: Menu Command

• 0: 

Write Global Setting

☞

p.251

• 1: 

Load Preload/Demo Data

☞

p.251

• 2: 

Change all bank references

☞

p.251

• 3: 

Touch Panel Calibration

☞

p.252

• 4: 

Half Damper Calibration

☞

p.252

• 5: 

Update System Software

☞

p.252

For more information, please see “Global: Menu Command” 
on page 251.

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands