manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 90

Combination mode

82

Timbre 01 (Timbre Number):

Category (Timbre Program)

[00...17/00...07]

Here, you can select the program used by each timbre by 
program category and sub-category. All programs are 
organized into up to eighteen categories and eight sub-
categories.

Press this popup button to get the Category/Program Select 
menu, then select the desired category and sub-category, 
and finally select the desired program.

Category/Timbre Program Select menu:

Here you can select the program for each timbre by main 
category and sub-category. All programs are classified into a 
maximum of eighteen main categories, and each category is 
classified into eight sub-categories. You can select programs 
using these main categories and sub-categories.

• Press 

Category

 and use the Category/Timbre Program 

Select menu to select a program.

For the procedure, please see “Category/Combination 
Select menu:,” above.

Program Select

[A...E: 000...127,

GM, g(1)...g(9), g(d): 001...128]

Here, you can select the program used by each timbre. The 
lower line displays part of the program name.

To switch the program of a timbre

• Choose 

Program Select

, use numeric keys 0–9 to input 

the program number, and press the ENTER switch.

• Choose 

Program Select

 and turn the VALUE dial, 

VALUE slider or use the 

q

/

u

 switches.

• If the 

Program Select

 parameter is chosen, the PROG 

BANK A–GM switches will switch program banks. (If 
Timbre Program Select is selected, the BANK switch 
LED of the program bank selected for that timbre will 
light.)

• From the Bank/Program Select menu you can view and 

select programs arranged by bank.

• From the Category/Program Select menu you can view 

and select programs by category.

• You can choose a program by transmitting MIDI 

program changes from a connected external MIDI 
device.

When you select a Combination on the M50, a MIDI 
program change for the selected combination number 
will be transmitted on the global 

MIDI Channel

 

(Global 1–1a). At the same time, bank select, program 
change, and volume (CC#7) messages will be 
transmitted on the MIDI channel specified for each 
timbre whose 

Status

 (Combi 3–1(2)c) is set to EXT or 

EX2. However, these messages will not be transmitted 
for timbres that are set to the same MIDI channel as the 
global MIDI channel. In this case, EX2 timbres will 
show the “Program” Bank as “–”, and will transmit the 
bank number that was specified in 

Bank Select (When 

Status=EX2)

 (Combi 3–1(2)c).

When you play on the M50 keyboard and controllers, 
MIDI messages are transmitted on the global 

MIDI 

channel

. At the same time, timbres whose 

Status

 is set 

to EXT or EX2 will transmit the same messages on their 
own MIDI channel.

If bank select and program change messages are 
received on a MIDI channel that matches the MIDI 
channel of a timbre whose 

Status

 is INT, the program of 

that timbre will change. However if the MIDI channel 
of the incoming message matches the global MIDI 

channel 

MIDI Channel

, then the combination will 

change.

If you do not want the combination to change, you can 
either change the global MIDI channel to a MIDI 
channel other than the channel on which the program 
change messages are being received, or you can 
uncheck 

Enable

 

Combination Change

 (Global 1–2b). 

You can also uncheck “Bank Change” so that only the 
program number will change and the bank will remain 
the same.

If you wish to change the program assigned to certain 
timbres without changing the combination, you can 
also set 

Enable Program Change

 (Combi 5–1–1(2)c) so 

that the program will change on certain timbres but not 
on others.

Bank/Timbre Program Select menu:

• Press the popup button located at the left of 

Program 

Select

, and choose a program from the Bank/Program 

Select menu.

For the procedure, please see “Bank/Program Select menu:” 
on page 2.

Play/Mute

[Play, Mute]

This setting mutes a timbre. 

Play:

 The timbre will produce sound.

Mute:

 The timbre will be muted (silent).

Solo On/Off

[On, Off]

Turns the Solo function on/off for each timbre.

The Solo function operates differently depending on the 
setting of the 

Exclusive Solo

 menu command.

If 

Exclusive Solo is off

, you can turn Solo on for more than 

one timbre. The setting will alternate each time you press 
the Solo On/Off button.

If 

Exclusive Solo is on

, pressing a Solo button will turn Solo 

on for only that timbre.

Note: 

The Solo On/Off status is not preserved when you 

write the combination.

Exclusive Solo

The menu’s 

Exclusive Solo

 parameter also affects the way 

that Solo works. When 

Exclusive Solo

 is 

Off

 (unchecked), 

you can solo multiple Timbres at once. 

When 

Exclusive Solo

 is 

On

 (checked), only one Timbre can 

be soloed at a time. In this mode, pressing a Solo button 
automatically disables any previous solos.

Tip:

 You can also toggle 

Exclusive Solo

 by holding 

ENTER

 

and pressing 

1 

on the numeric keypad.

Timbre 02...08, 09...16 (Timbre Number):

Here you can specify the program, Play/Mute status, and 
Solo On/Off status for timbres 2–8 and 9–16. These are the 
same as for timbre 01. For more information, please see 
“Timbre 01 (Timbre Number):,” above.

▼

0–1(2): Menu Command

• 0: 

Write Combination

☞

p.120

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Copy from Program

☞

p.120

For more information, please see “Combination: Menu 
Command” on page 120.

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands