manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 38

Program mode

30

PROG P3–1: Filter1

Filtering can make subtle or dramatic changes to the 
oscillator’s timbre. Each oscillator has two multimode 
resonant filters, A and B, as well as a dedicated filter 
envelope and keyboard tracking generator.

These pages let you control all aspects of the filters. Among 
other things, you can:

• Make basic settings for each oscillator’s filters, including 

routing, modes, cutoff, resonance, etc.

• Set up filter modulation, including keyboard tracking, 

the filter envelope, LFO modulation, and AMS control.

Note that when the 

Oscillator Mode

 is set to 

Single

, only 

Oscillator 1’s filters are active; the pages for Oscillator 2’s 
filters will be grayed out.

3–1–1: Filter1

This page contains all of the basic settings for Oscillator 1’s 
Filter A and Filter B. For example, you can:

• Set up the filters to produce a single 12 dB/oct filter, 

dual 12 dB/oct filters in either serial or parallel routing, 
or a single 24 dB/oct filter.

• Set each of the two filters to Low Pass, High Pass, Band 

Pass, or Band Reject modes.

• Set the cutoff, resonance, and input and output levels of 

each filter, including modulation of resonance and 
output level.

3–1–1a: Filter Routing

Filter Routing

[Single, Serial, Parallel, 24dB(4Pole)]

Each oscillator has two filters, Filter A and Filter B. This 
parameter controls whether one or both of the filters are 
used, and if both are used, it controls how they are 
connected to each other.

Single.

 This uses only Filter A as a single 2-pole, 12 dB/

octave filter (6 dB for Band Pass and Band Reject). When this 
option is selected, the controls for Filter B will be grayed out.

Serial.

 This uses both Filter A and Filter B. The oscillator 

first goes through Filter A, and then the output of Filter A is 
processed through Filter B. 

Parallel.

 This also uses both Filter A and Filter B. The 

oscillator feeds both filters directly, and the outputs of the 
two filters are then summed together. 

24dB/oct.

 This merges both filters to create a single 4-pole, 

24 dB/octave filter (12 dB for Band Pass and Band Reject). In 
comparison to Single, this option produces a sharper roll-off 
beyond the cutoff frequency, as well as a slightly more 

delicate resonance. Many classic analog synths used this 
general type of filter.

When 24 dB/oct is selected, only the controls for Filter A are 
active; the controls for Filter B will be grayed out.

Serial and Parallel Routing

12db/oct / 24db/oct

3–1–1b: Filter A

Filter Type

[Low Pass (12dB/oct), High Pass (12dB/oct),

Band Pass (6dB/oct), Band Reject (6dB/oct)]

The filter will produce very different results depending on 
the selected filter type. The selections will change slightly 
according to the selected 

Filter Routing

, to show the correct 

cutoff slope in dB per octave.

Low Pass (12dB/oct).

 This cuts out the parts of the sound 

which are 

higher

 than the cutoff frequency. Low Pass is the 

most common type of filter, and is used to make bright 
timbres sound darker.

High Pass (12dB/oct).

 This cuts out the parts of the sound 

which are 

lower

 than the cutoff frequency. You can use this 

to make timbres sound thinner or more buzzy. 

Band Pass (6dB/oct).

 This cuts out all parts of the sound, 

both highs and lows, except for the region around the cutoff 

3–1

–1a

3–1

–1

Menu

3–1

–1c

3–1

–1b

Filter A (Low Pass)

Oscillator

Filter B (High Pass)

Oscillator

Filter A (Low Pass)

Filter B (High Pass)

Low Pass

: 

12dB/oct

Low Pass

: 

24dB/oct

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands