manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 2

 

ii

 

Conventions in the operation manuals

 

References to the M50

 

The M50 is available as three models: the the 88-key 
M50-88, the 73-key M50-73, and the 61-key M50-61. 
References in these manuals to “the M50” refer to all of 
these models collectively.

 

Abbreviations for the manuals: OM, PG

 

In the documentation, references to the manuals are 
abbreviated as follows.

 

OM:

 

 Owner’s Manual

 

PG:

 

 Parameter Guide

 

Procedure steps 1. 2. 3. …

 

These indicate the steps of a procedure.

 

Symbols , , 

 

Note

 

, 

 

Tips

 

These symbols respectively indicate a caution, a MIDI-
related explanation, a supplementary note, or a tip.

 

Example screen displays

 

The parameter values shown in the example screens of 
this manual are only for explanatory purposes, and 
may not necessary match the values that appear in the 
Display of your instrument.

 

MIDI-related explanations

 

CC# is an abbreviation for Control Change Number.

In explanations of MIDI messages, numbers in square 
brackets [  ] always indicate hexadecimal numbers.

 

* This product uses the T-Kernel source code in compli-

ance with the T-License of the T-Engine forum (www.t-
engine.org).

* Apple, Mac are trademarks of Apple Inc., registered in 

the US. and other countries. 

* Windows XP is a registered trademark of Microsoft 

Corporation in the U.S. and other counties. 

* All other product and company names are trademarks 

or registered trademarks of their respective holders. 

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands