manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 252

Global mode

244

6–1b: Octave, Resolution, Sort, Latch, Key 

Sync., Keyboard

Octave

[1, 2, 3, 4]

Resolution

[

 

 ,  

 ,  

 

 ,  

 ,  

 

 ,  

 ]

Sort

[Off, On]

Latch

[Off, On]

Key Sync.

[Off, On]

Keyboard

[Off, On]

For more information, please see “7–1: ARP Setup” on 
page 59.

Pattern

, 

 (Tempo), 

Octave

, 

Resolution

, 

Sort

, 

Latch

, 

Key Sync.

, and 

Keyboard

 are parameters that can be 

set in Program, Combination, Song, and Song Play 
modes, but you can also set them here.
If you move here from Program or Combination mode 
and set these parameters, you must return to the origi-
nal mode and write them. These parameters cannot be 
written by the “Write Arpeggio Patterns” command in 
this page.

6–1c: Arpeggio Pattern Setup

These parameters are not valid for preset patterns P0–
P4.

Arpeggio Tone Mode

[Normal, Fixed Note]

This selects the 

Tone

 type of the arpeggio pattern.

Normal: 

This is the conventional arpeggiator type. Each 

Tone in the arpeggio will play based on the note number of 
the keys that you are pressing on the keyboard.

Fixed Note:

 The note number of each tone is fixed. The note 

numbers played on the keyboard will be ignored, and the 
arpeggio will sound using specified pitches. Note numbers 
from the keyboard will only control the trigger timing of the 
arpeggiator. Fixed Note mode is ideal for arpeggio patterns 
that you are using as drum patterns.

In the P6: User Arpeggio, Pattern Edit page, the Tone 
indicators will be “

●

” when Normal is selected here, or “

❍

” 

when Fixed Note is selected.

If 

Arpeggio Tone Mode

 is set to Fixed Note, operating 

the control surface ARP knob 4 (OCTAVE) will not 
change the octave of the arpeggio pattern.

Arpeggio Type

[As Played…Up&Down]

Specifies the relationship between the arpeggio notes speci-
fied from the keyboard and the Tone at each step.

As Played:

 If there are more Tones in a step than arpeggio 

notes specified (notes played on the keyboard), those steps 
will not sound.

As Played (Fill):

 If there are more Tones in a step than 

arpeggio notes specified (notes played on the keyboard), the 
last-played note (

Sort

 is Off), or the highest note (

Sort

 is On) 

will sound for those steps.

Running Up:

 If there are more Tones in a step than arpeggio 

notes specified (notes played on the keyboard), the arpeggio 
will return to the first note (if 

Sort

 is Off), or the lowest note 

(if 

Sort

 is On) and sound it.

Up&Down:

 If there are more Tones in a step than arpeggio 

notes specified (notes played on the keyboard), the arpeggio 
will return in reverse direction from the last arpeggio note 
back toward the first.

Example)

If you set 

Length

 to 04, 

Step No.

 01 to Tone0, 

Step No.

 02 

to Tone1, 

Step No.

 03 to Tone2, 

Step No.

 04 to Tone3, and 

simultaneously play three notes to produce an arpeggio, 
the following results will be produced depending on the 

Arpeggio Type

.

As Played:

 0 

→

 1 

→

 2 

→

 rest 

→

 0 

→

 1 

→

 2 

→

 rest 

→

 0 ...

As Played (Fill):

 0 

→

 1 

→

 2 

→

 2 

→

 0 

→

 1 

→

 2 

→

 2 

→

 0 ...

Running Up: 

0 

→

 1 

→

 2 

→

 0 

→

 0 

→

 1 

→

 2 

→

 0 

→

 0 ...

Up&Down:

 0 

→

 1 

→

 2 

→

 1 

→

 0 

→

 1 

→

 2 

→

 1 

→

 0 ...

Octave Motion

[Up, Down, Both, Parallel]

Specifies the operation when “

Octave

” is set to 2–4 octaves.

Up:

 Notes will repeatedly ascend within the specified range 

of octaves.

Down:

 Notes will repeatedly descend within the specified 

number of octaves.

Both:

 Notes will repeatedly ascend and descend within the 

specified number of octaves.

Parallel:

 The notes of the specified octaves will sound 

simultaneously.

Fixed Note Mode

[Trigger As Played, Trigger All Tones]

When the 

Arpeggio Tone Mode

 is Fixed Note, specifies the 

condition that will trigger the Tones.

Trigger As Played:

 The 

Tones

 will be triggered according to 

the number of keys pressed.

Trigger All Tones:

 Pressing a single key will trigger all 

Tones

.

Example)

We will use an 

Arpeggio Tone Mode

 Fixed Note pattern 

on drums. Tone 0 is assigned a note number that will 
sound a kick, Tone 1 a snare, and Tone 2 a hi-hat.

With a setting of Trigger As Played and 

ArpeggioType

 is 

As Played, pressing one key will sound only Tone 0 
(kick). Pressing two keys will sound Tone 0 (kick) and 
Tone 1 (snare). Pressing three keys will sound all three 
Tones 0–2 (kick, snare, hi-hat). If the “Velocity” of each 
Tone is set to Key, each Tone will be sounded at the veloc-
ity with which each key was played.

With a setting of 

Trigger All Tones

, playing one key is 

sufficient to sound all three; Tone 0 (kick), Tone 1 (snare), 
and Tone 2 (hi-hat). If the “Velocity” of each Tone is set to 
Key, the Tones will be sounded at the corresponding 
velocity each time a key is pressed.

▼

6–1: Menu Command

• 0: 

Write Arpeggio Patterns

☞

p.255

• 1: 

Rename Arpeggio Pattern

☞

p.255

• 2: 

Copy Arpeggio Pattern

☞

p.256

For more information, please see “Global: Menu Command” 
on page 251.

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands