manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 141

SEQ P0–1: Play/REC 0–1–3: Mixer T01–08, 0–1–4: Mixer T09–16

133

0–1–3: Mixer T01–08, 
0–1–4: Mixer T09–16

Here, you can set the pan and volume of each MIDI track.

0–1–3(4)a: Location, Meter, Tempo, 

Tempo Mode, Song Select, 
Track Select, Reso, RPPR

For more information, please see “0–1–1: Program T01–08, 
0–1–2: Program T09–16” on page 129.

0–1–3(4)b: Pan, Volume

The pan and volume that you specify here will be used 
when you play back or record from the beginning of the 
song. If you change the settings during recording, the 
changes will be recorded as MIDI data, and pan and volume 
will change during playback. You can also change the 
settings during playback. However, when the song reaches a 
location where pan or volume data was recorded, the 
settings will change accordingly.

Selected Track Info

This area shows information on the MIDI track selected for 
editing. 

For more information, please see “0–1–1(2)b: Track Program 
Select” on page 131.

Track 01 (Track Number):

Category

[Category Name]

This indicates the category.

Pan

[RND, L001...C064...R127]

Here, you can set the pan of each MIDI track.

L001…C064…R127:

 A setting of L001 is far left and R127 is 

far right. A setting of C064 will reproduce the oscillator pan 
setting of the Program mode.

If a mono insert effect is in use, the settings you make here 
will be ignored. In this case, the 

Pan: #8

 parameter in P8–1: 

IFX– Insert FX Setup page will adjust the panning of the 
sound after the Insert Effect. For more information, please 
see “Mixer” on page 279.

RND:

 The pan position will change randomly at each note-

on.

If 

Status

 (Seq 3–1(2)c) is INT or BTH, CC#10 Pan can be 

received to control the panning. When receiving CC#10, 
a value of 0 or 1 is far left, 64 is center, and 127 is far 
right. When you change the song or return to the 
beginning of the song, tracks whose 

Status

 is EXT, EX2 

or BTH will transmit the pan you specify here as a 
MIDI message (except for RND). (See Global P1: MIDI, 
SEQ Mode “Track MIDI Out” on page 222)

Volume

[000...127]

Here, you can set the volume of each MIDI track.

When 

Status

 (Seq 3–1(2)c) is INT or BTH, CC#7 Volume 

can be received to control the volume. The volume of a 
track is determined by multiplying the MIDI Volume 
(CC#7) and Expression (CC#11) values. When you 
change the song or return to the beginning of the song, 
tracks whose 

Status

 is EXT, EX2 or BTH will transmit 

the volume you specify here as a MIDI Volume 
message. (See Global P1: MIDI, SEQ Mode “Track MIDI 
Out” on page 222)

Track 02...08, 09...16 (Track Number):

For more information, please see “Track 01 (Track 
Number):,” above.

0–1

–3b

0–1

–3a

0–1

–3

Menu

OSC1: 
Amp1 Pan=L001
OSC2: 
Amp2 Pan=R127

Left

Center

Right

Pan (CC#10)

C064

Left

Center

Right

L032

L001

R096

R127

Left

Center

Right

Left

Center

Right

OSC1

OSC2

OSC1

OSC2

OSC1: 
Amp1 Pan=L032
OSC2: 
Amp2 Pan=R096

Pan (CC#10)

C064

L032

L001

R096

R127

OSC1: 
Amp1 Pan=C064
OSC2: 
Amp2 Pan=C064

Left

Center

Right

Pan (CC#10)

C064

Left

Center

Right

L032

L001

R096

R127

OSC1

OSC2

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands