manualshive.com logo in svg

Korg M50-73, Parameter Manual, Page: 169 / 419

Share
Download
Korg M50-73 Parameter Manual Download Page 169

SEQ P5–1: MIDI Filter 1 5–1–3: –2 T01–08, 5–1–4: –2 T09–16

161

5–1–3: –2 T01–08, 
5–1–4: –2 T09–16

5–1–3(4)a: Track Select, Tempo, RPPR
5–1–3(4)b: Track Info

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 149.

5–1–3(4)c: MIDI Filter 2

Track 01 (Track Number):

Enable JS X as AMS

[Off, On]

Specifies whether or not MIDI pitch bend messages (the X 
axis of the joystick) will be received to control the AMS effect 
assigned to JS X. (This is not a filter for MIDI pitch bend 
message reception.) For more information, please see 
“Alternate Modulation Sources (AMS)” on page 373.

Enable JS+Y

[Off, On]

Specifies whether or not MIDI CC#1 (the +Y axis of the 
joystick, or a realtime control knob assign setting) will be 
received.

Enable JS–Y

[Off, On]

Specifies whether or not MIDI CC#2 (the –Y axis of the 
joystick, or a realtime control knob assign setting) will be 
received.

Enable Ribbon

[Off, On]

Specifies whether or not MIDI CC#16 (specified as the 
assignment of a realtime control knob) will be transmitted or 
received.

Track 02...08, 09...16 (Track Number):

These are the MIDI Filter 2 settings for MIDI tracks 2–8 and 
9–16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

5–1–3(4)

: 

Menu Command

• 0: 

Memory Status

☞

p.191

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Rename Song

☞

p.191

• 3: 

Delete Song

☞

p.191

• 4: 

Copy From Song

☞

p.191

• 5: 

Load Template Song

☞

p.191

• 6: 

Save Template Song (Save as User Template 
Song)

☞

p.192

• 7: 

FF/REW Speed

☞

p.192

• 8: 

Set Location (Set Location for Locate Key)

☞

p.192

• 9: 

GM Initialize

☞

p.193

• 10: 

Copy From Combi (Copy from 

Combination)

☞

p.194

• 11: 

Copy from Program

☞

p.195

For more information, please see “Sequencer: Menu 
Command” on page 191.

5–1

–3c

5–1

–3b

5–1

–3a

5–1

–3

Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments