manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 157

SEQ P2: EQ 2–1: Trim T01–08, 2–2: Trim T09–16

149

SEQ P2: EQ

2–1: Trim T01–08, 
2–2: Trim T09–16

Here, you can set the signal level that enters the EQ of tracks 
1–8 and 9–16.

2–1(2)a: Track Select, Tempo, RPPR

Track Select

[Track01…16, Master Track]

 (Tempo)

[040.00…300.00, EXT]

RPPR

[Off, On]

Here, you can select the track, specify the tempo that will 
control the arpeggiator etc., and turn RPPR on/off.

For more information, please see “0–1–1(2)a: Location, 
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso, 
RPPR” on page 129.

2–1(2)b: Track Info

For more information, please see “0–1–1(2)b: Track Program 
Select” on page 131.

2–1(2)c: Trim

Track 01 (Track Number):

Auto Load Prog EQ

[Off, On]

When you first load a Program into a Track, this parameter 
determines whether or not the Program’s EQ settings will be 
loaded as well.

Once the Program has been loaded, you can change any or 
all of the EQ settings as desired. All such edits are stored in 
the Song, without affecting the original Program.

Regardless of this setting, subsequent edits to the Program’s 
EQ in Program mode will not affect the Song.

On

: the Program’s EQ settings will be loaded automatically 

along with the Program. This is the default setting.

Off

: the Program’s EQ settings won’t be loaded. Use this if 

you’ve set up the EQ in a specific way, and then want it to 
stay unchanged while you try out different Programs.

Bypass

[Off, On]

If this is 

On (checked)

, all of the EQ will be disabled, 

including 

Input Trim

. Bypass can be convenient for 

comparing the results of the EQ with the original signal.

Input Trim

[00…99]

This controls the volume level going into the EQ. Note that 
this parameter uses a linear scale; 50 is equivalent to –6 dB, 
25 is the same as –12 dB, and so on.

High settings of the 

Low

, 

Mid

, and 

High Gain

 (Seq 2–3(4)a) 

controls can cause substantial increases in the overall level. 
You can compensate for this by turning down the input trim.

Track 02...08, 09...16 (Track Number):

Here, you can set the parameters for MIDI tracks 2–8 and 9–
16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

2–1(2): Menu Command

• 0: 

Memory Status

☞

p.191

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Rename Song

☞

p.191

• 3: 

Delete Song

☞

p.191

• 4: 

Copy From Song

☞

p.191

• 5: 

Load Template Song

☞

p.191

• 6: 

Save Template Song (Save as User Template 
Song)

☞

p.192

• 7: 

FF/REW Speed

☞

p.192

• 8: 

Set Location (Set Location for Locate Key)

☞

p.192

• 9: 

GM Initialize

☞

p.193

• 10: 

Copy From Combi (Copy from 

Combination)

☞

p.194

• 11: 

Copy from Program

☞

p.195

For more information, please see “Sequencer: Menu 
Command” on page 191.

2–1c

2–1b

2–1a

2–1

Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands