manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 202

Sequencer mode

194

Copy From Combi (Copy from 
Combination)

This command copies the parameters of the specified 
combination to the setting data of the currently selected 
song.

Note: 

Only the timbres used by the combination will be 

copied. Timbres in the combination whose Status is Off will 
not be copied. If any timbres are set to Mute, the 
corresponding tracks of the song will be set to a 

Status

 of 

Off.

1. In Combination, select the copy source destination.

2. Use the IFXs

,

 MFXs and TFX check boxes to specify 

whether you want the effect settings of the combina-
tion to be copied as well.

IFXs:

 All insert effect settings of the copy-source 

combination (the contents of the Insert FX Setup page and 
the IFX1–5 effect parameters) will be copied.

MFXs:

 All master effect settings of the copy-source 

combination will be copied.

TFX:

 All total effect settings of the copy-source combination 

will be copied.

3. Specify the desired Auto adjust Arp setting for Multi 

REC setting.

You have the option of checking the 

Auto adjust Arp setting 

for Multi REC

. As necessary, this function will adjust the 

MIDI channel etc. of any tracks that need to be changed, 
and/or add new tracks, in order to ensure that when you 
perform multi-recording with the arpeggiator on, the same 
sound will be reproduced during recording as during 
playback.

Note: 

This function makes adjustments depending on the 

ARP ON/OFF state of the combination. When you copy a 
combination that was written with the arpeggiator turned 
off, it is assumed that you will leave the arpeggiator off in 
the song. If you want to use the arpeggiator in the song, you 
should write the combination with the arpeggiator turned 
on, and then copy it to the song.

If this is 

checked

, the MIDI channels etc. of the tracks will be 

corrected. 

Multi REC

 (Seq 0–1–8b) and 

PLAY/MUTE/REC

 

(Seq 0–1–1(2)a) will also be set automatically. 
In addition, 

Recording Setup

, 

Overwrite

 (Seq 0–1–8b) will 

be selected. (Note that the automatically-set 

Multi REC

 and 

PLAY/MUTE/REC

 will be reset when you re-select the 

song.)

Note: 

For details on the data that will be adjusted, see below. 

The content described here will be corrected automatically. 
Depending on the settings of the combination, it may be 
necessary to make additional changes to the track settings in 
addition to the settings here.

If the recorded performance is not reproduced 
correctly during playback

If you use the menu command 

Copy From Combi

 to copy 

the settings of a combination, and then perform multi-track 
recording with the arpeggiator turned on, there may be 
cases in which the performance during recording is not 
reproduced correctly during playback.

Multiple tracks that are set to the same MIDI channel are 
combined into a single stream of performance data during 
recording. If there is a track with the same MIDI channel as 
the track being played by the arpeggiator, the data played 
by the arpeggiator will be combined with the performance 
data that was played manually, and all of this data will be 
sounded by each track of the same channel (if 

Status

 is INT).

In such cases, you can solve the problem by creating a track 
that will drive the arpeggiator on a different MIDI Channel.

If the recorded performance is not reproduced by the 
playback, check the following conditions.

These settings can be executed automatically if you check 

Auto adjust Arp setting for Multi REC

 in the menu 

command 

Copy From Combi

. Normally, you will check this 

to execute the settings. In this case, these adjustments will 
not be necessary, but you can verify here that the automatic 
adjustments have been made.

• SEQ P7: ARP/DT– ARP Setup T01–08 page

Arpeggiator Run

 A, B, and 

Arpeggiator Assign

 settings

• SEQ P3: Track Param– MIDI Ch T01–08 page

MIDI Channel

 settings

If 

Arpeggiator Run

 A and B are checked, and the 

arpeggiator is assigned to a track, make sure that 

MIDI 

Channel

 (Global P1: MIDI) is set to other than 01.

Make sure that the global MIDI channel (Global P1: MIDI, 

MIDI Channel

) is set to 01.

Arpeggiator Run

MIDI Channel 

*a

*a If the “MIDI Channel” of multiple tracks operated by the 

arpeggiator is set only to 01, refer to the lines for “01 
only.” If the “MIDI Channel” settings are 01 and one 
other channel, such as 01 and 02, then refer to the lines 
for “01 02, etc.” If the “MIDI Channel” settings are 01 and 
multiple other MIDI channels, such as 01 and 02 and 03, 
then refer to the line for “01 02 03, etc.”

Correction

If either “A” or “B” are 
checked

01 only

Correction required

01 02, 01 03, etc.

No correction required

If both “A” and “B” are 
checked

01 only

Correction required

01 02, 01 03, etc.

Correction required for 
only one

01 02 03, etc.

No correction required/
Correction required 

*b

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands