Korg M50-73 Parameter Manual Download

Page: 411 / 419

Compatibility with the M3 Recording the Arpeggiator or RPPR function on an external MIDI sequencer/computer

403

Global Mode “Foot Switch Assign” parameters

Settings related to other functions will be loaded in the
following ways.

The following settings will be maintained as internal data,
but will be ignored.

• KARMA LATCH

• KARMA SCENE

• X-Y MODE

• X-Y MOTION

• KARMA Slider 5...8

• KARMA Switch 1...8

• PAD 5...8

Global Mode “Foot Pedal Assign” parameter

Settings related to other functions will be loaded in the
following ways.

KARMA Slider 5...8 settings will be maintained as internal
data, but will be ignored.

M50

KARMA ON/OFF

ARP ON/OFF

RT Slider 1...8

RT Knob 1–A...4–B

KARMA Slider 1...4

ARP GATE, VELOCITY, LENGTH, OCTAVE

PAD 1...4

Chord Trigger SW 1...4

M50

RT Slider1...8

RT Knob1–A...4–B

KARMA Slider1...4

ARP GATE, VELOCITY, LENGTH, OCTAVE

Summary of Contents for M50-73




































































































































































































































































































































































































































Search results

Summary of Contents for M50-73

Reviews:

Related manuals for M50-73

Brands by name

Popular brands

Korg M50-73, Parameter Manual

Search results

Summary of Contents for M50-73

Reviews:

Related manuals for M50-73

Brands by name

Popular brands