Korg M50-73 Parameter Manual Download Page 77

Page: 77 / 419

PROG P8: IFX (Insert Effect) 8–8: Common FX LFO

On (checked):

The speed of the Common FX LFO will be

determined by the

BPM

Base Note

, and

Times

settings (see

below).

BPM

[MIDI, 40.00...300.00]

Base Note

[

]

Times

[01...32]

The frequency of the Common FX LFO will be the length of
the

Base Note

note value multiplied by the

Times

value,

relative to the tempo specified by the

BPM

value. If

BPM

set to MIDI, this will operate according to the

(Tempo)

(Prog 0–1a) setting. If

MIDI Clock

(Global 1–1a) is set to

External, this will follow the MIDI clock of the master
device.

8–8b: Common FX LFO2

The parameters are identical to those for Common FX LFO1,
as described under “8–8a: Common FX LFO1,” above.

▼

8–8: Menu Command

• 0:

• 1:

• 2:

Copy Insert Effect

☞

p.76

• 3:

Swap Insert Effect

• 4:

For more information, please see “Program: Menu
Command” on page 73.

Summary of Contents for M50-73




































































































































































































































































































































































































































Search results

Summary of Contents for M50-73

Reviews:

Brands by name

Popular brands

Korg M50-73, Parameter Manual

Search results

Summary of Contents for M50-73

Reviews:

Brands by name

Popular brands