Konsberg AIS 200, Installation Manual

Page: 85 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix B - Digital interface IEC 61162-1
NOTE 1 If the sentence is used, the two fields, Sequence Number and MM
are always provided.
SI of responder,
OTE 2 The sequence number should be the same number as the sequence number of the
NOTE 3
e
NOTE 4
NOTE 5
cters that can be used are listed in IEC 61162-1, table 2. Some
characters in this table are the reserved characters listed in IEC 61162-1, table 1.
NOTE 6
ype" for
10.3.11 tatic Data
This sentence is used to enter static parameters into a shipboard AIS. The parameters in this
sentence su
N
LRI and LRF sentences that initiated this reply.
The individual information items shall be a null field if any of the following thre
conditions exist:
The information item was not requested,
The information item was requested but is not available, or
The information item was requested but is not being provided.
Current number of persons on-board, including crew members: 0 to 8191.
0 = default (not available), 8191 = 8191 or more people.
The chara
Reserved characters may be used, but they must be represented using the "^-
method" (See IEC 61162-1, § 5.1.3.).
See ITU-R M.1371:2000, table 17, parameter "Type of ship and cargo t
the range of valid values available for this field.
SSD – Ship S
pport a number of the ITU-R M.1371 messages.
NOTE 1 Ship call sign. A null field indicates that the previously entered call sign is
unchanged. The string of characters "@@@@@@@" are used to indicate that
the call sign is not available.
NOTE 2 The characters that can be used in the name are listed in the ITU-R M.1371, table
14 (6-bit ASCII). Some of the acceptable characters in this 6-bit ASCII table are
reserved characters under IEC 61162-1. They must be represented using the "^-
method" (See IEC 61162-1, section 5.1.3.). A null field indicates that the
75