manualshive.com logo in svg

Konsberg AIS 200, Installation Manual

Share
Download
Konsberg AIS 200 Installation Manual Download Page 84

Kongsberg AIS 200 Installation Manual, rev. 2 

 

Appendix B - Digital interface IEC 61162-1 

 

NOTE 1  

nd MMSI of responder, 

 

OTE 3  

 be a null field if any of the following three 

available. 

The information item was requested, but it is not being provided. 

10.3.10 LR3 – Long-range Reply for function requests "I, O, P, U 

If the sentence is used, the two fields, Sequence Number a
are always provided. 

 
NOTE 2   The sequence number should be the same number as the sequence number of the 

LRI and LRF sentences that initiated this reply. 

The individual information items shall

N

conditions exist: 
The information item was not requested. 
The information item was requested, but it is not 

 
 

 

and W" 

The LR3-sentence contains the information requested by the "I, O, P, U, and W" function 
identification characters (see the LRF-sentence). 

 

74 

Summary of Contents for AIS 200
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands