Konsberg AIS 200, Installation Manual

Page: 41 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Connecting & configuring external equipment
4.2.5 Output sentences
Sentence Content Transmission interval
ABK Acknowledgement message
Upon reception of messages 7 and
13, and when sending message 15
VDO VHF Data link own message 1 Hz nominal
ALR Alarm messages 30 seconds/1 min.
TXT Indication messages When change of status
ACA AIS channel assignment command When change of status
VDM VHF Data link message When receiving on VDL
LRI Long-range interrogation
When LR request received & when
LR response sent
LRF Long-range function identification
When LR request received & when
LR response sent
LR1 Long-range response When LR response sent
LR2 Long-range response When LR response sent
LR3 Long-range response When LR response sent
4.3 Long-Range interface
The Long Range interface provides a two-way interface for equipment that provides for long-
range communications, such as Inmarsat.
4.3.1 Physical location
Installed on P2, pins 1 - 5, see figure on page 25.
4.3.2 Port configuration
The Long Range port has the following default settings:
Baud Rate Parity Bits Stop Bit
4800 N 8 1
The baud rate is configurable from 1200 to 57600. Refer to
Configuring external serial
ports , pages 37 and 95.
31