Konsberg AIS 200, Installation Manual

Page: 36 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Installation
3.9 Pilot plug
A Pilot plug is included in the AIS 200 system and is located at the rear of the AIS 200 MKD.
The plug is used for connecting a Personal Pilot Unit (PPU) to the AIS 200 system.
The pilot plug is an AMP CPC series 2/Receptacle (Square Flanged), Shell size 11, 9-pin.
In case of a panel mounted MKD, an extension cord must be used.
Default baud rate is 38400, N, 8, 1.
Signal name Seatex notation Pin on AMP
206486-1
TX(A) Pilot_TD(A) (TXA) 1
TX(B) Pilot_TD(B) (TXB) 4
RX(A) Pilot_RD(A) (RXA) 5
RX(B) Pilot_RD(B) (RXB) 6
Shield Shield 9
3.10 External alarm
The Mobile Unit does not include an acoustic alarm, but has a built-in alarm functionality. An
alarm will open the alarm relay, which can be used to trigger an external alarm.
The diagram below shows how an external alarm may be connected to the rear of the Mobile
Unit.
AIS 200
Rear
Panel
11 12
P2
+
-
+
-
BUZZER
NC NO
+
-
ALM_C
ALM_NC
FROM UPS SUPPLY
26