Konsberg AIS 200, Installation Manual

Page: 83 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix B - Digital interface IEC 61162-1
4 = Information is available but not provided (i.e. restricted access determined by
ship's master).
10.3.8 LR1 – Long-range Reply with destination for function
request "A"
The LR1-sentence identifies the destination for the reply and contains the information
requested by the "A" function identification character. (See the LRF-sentence.)
NOTE 1 of responder, and MMSI of requestor
NOTE 2
he sequence number should be the same number as the sequence number of the
RI and LRF sentences that initiated this reply.
NOTE 3 ers that can be used are listed in IEC 61162-1, table 2. Some
characters in this table are the reserved characters listed in IEC 61162-1, table 1.
The individual information items shall be a
null field, if any one of the following three conditions exist:
The three fields, sequence number, MMSI
are always provided.
T
L
The charact
Reserved characters may be used, but they must be represented using the "^-
method" (See IEC 61162-1, § 5.1.3.).
The information item was not requested.
The information item was requested, but it is not available.
The information item was requested, but it is not being provided.
10.3.9 LR2 – Long-range Reply for function requests "B, C, E,
and F"
The LR2-sentence contains the information requested by the "B, C, E, and F" function
identification characters. (See the LRF-sentence.)
73